Please help us improve the quality of example sentences! Edit on Github

他手指上的刀痕是一把小刀割的。The cut in his finger was from a knife.

他身中数枪,还有刀痕。In his body number gun, but also has the slash.

Other words in sentence

加工残留刀痕对轴的横向断裂起了促进作用。The improper processing procedure also promoted the shaft broken.

饰条必须光滑,无可见刀痕,锯痕,或砂痕。Moulding must be smooth and free of visible knife, saw, or sanding marks.

他问刀子怎么架到我脖子上的,怎么脖子上没有刀痕。He wanted to know how the knife was used because there were no marks on my neck.

丢弃旧菜板,因为上面的刀痕是病毒隐藏的地方。Discard worn out boards , as cut marks on them serve as hiding places for viruses.

将过渡圆弧部分抛光以减少刀痕所引起的切口效应。Reduce notch effects from circumferential grooves by cross polishing the fillet area.

Other words in sentence

刀痕脸得意洋洋站在山壁上引诱霍元甲,霍元甲飞到山壁上与刀痕脸决斗。Mark face gloat stood on the mountain seduce fearless, fearless fly to duel with mark face on the mountain.

阐述了接插件端子模具的舌头成形方法、半卷圆的设计思路、无接刀痕的设计技巧。The tongue-shaped method of terminal has been expounded. The design idea of half-circle with non lapping defect has been put forward.

据警方称,韦斯顿手上有刀痕,而在出现分歧的时候威廉姆斯甚至威胁要跳下阳台。According to the police report, Weston was found with cuts on his arms and Williams had threatened to jump off a balcony during the disagreement.

修正材质转换区后的影像再经过影像型态学的处理,可去除影像轮廓与切削刀痕产生的影像误差,以供后续的应用。By the image processes from this study, we can now correct images from 3D digitizers, and thus we can offer a accurate images for our applications.

质地均匀、外观平整、表面光滑,无裂纹、气泡、分层,没有影响使用的机械损伤、刀痕等缺陷。It should be homogeneous in structure, with smooth surface, without the crack, airbubble, flatted , mechanical damage scratch, knife mark and so on.

Other words in sentence

工件内表面存在刀痕等机加工缺陷,造成应力集中促进了裂纹的形式。The manufactured defects on the inside of the drilling collar as stress concentration location play an important part in the initiation of the cracks.

结论表明,只要找到接刀痕现象产生的主要原因,有针对性地采取相应措施,接刀痕现象所造成的加工误差是能够控制在加工要求所允许的范围内的。The conclusions indicate that if the main causes of the phenomenon of gear mark are found, then corresponding measures can be taken to limit the error.

系统配置了一个低通滤波器,可以有效地消除切削振动及工件表面刀痕对测量的影响。A lowpass filter is disposed in the system, so that the effect of vibration in cutting and cutting trace of the workpiece surface on measuring may be effectively eliminated.