Please help us improve the quality of example sentences! Edit on Github

增加机械加工性能。To improve machinability.

镍铜，易加工，但抗裂性较差。Copper nickel, good machinability and bad crack resistance.

Other words in sentence

它的可机加工性和不锈钢相同。Their machinability is similar to that of stainless steels.

工具钢通常要用球化来提高切削性。Tool steels are normally spheroidized to improve machinability.

所开发的合金获得了极好的切削性能。An excellent machinability can be obtained for the developed alloy.

阐述了铸铁材料尤其是白口铸铁的切削性能。Machinability of cast iron, especially white cast iron, was explained.

超硬脆材料的难加工性制约了其推广应用。Hard machinability of hard-brittle material is crucial for its application.

Other words in sentence

综述了国内外在金属基复合材料切削加工性及机理方面研究的进展情况。The advances in recent researches on MMCs' machinability are reviewed in this paper.

钨及其合金是非常好的工程材料熏但其切削加工性差。Tungsten and its alloy are very good materials in engineering, but their machinability is worse.

尽管已不再大量的被使用，近乎准确的机加工率在以下的例子中能够被看到。Although not used much any more, approximate machinability ratings are available in the example below.

对轿车发动机缸体的材质和加工性进行了实验研究。The structure, property and machinability of materials of sedan-car engine block was tested and studied.

改善硫化锰和氟化钙的分布，将会改善切削加工性。To improve the homogeneity of manganese sulfide and calcium fluoride, the machinability could be enhanced.

Other words in sentence

该合金具有硬度高、机加工性能好、强度适当、铸造性能好等优点。The alloy has many advantages including good casting behavior, high hardness, good machinability and proper strength.

其切削性能良好，比起含高铬镍的耐热合金来，成本极低。Its machinability is fair and its all over cost is exceedingly low in comparison with that of high Cr-Ni refractory alloys.

本文探讨了晶体材料的切削加工性，重点分析了切削条件对表面粗糙度的影响。The machinability of crystal material is studied, and the influence of the cutting condition on surface roughness is analyzed.

用显微照像法显示改进机械加工性能的结构钢硫化物形状的特征。Characterization of sulfide shapes in structural steels with improved machinability using standard diagrams. Micrographic method.

镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。Copper nickel, good machinability bad crack resistance. Repair welding of shole gray cast iron machined surface subject to no load.

Other words in sentence

对718塑料模具钢经过不同工艺热处理后的加工性能进行了研究，分析了影响其加工性能的主要因素。The machinability of 718 plastic die steel after different heat treatment was studied and the main influence factors was discussed.

探讨晶体材料的切削加工性，重点分析切削条件对实现镜面车削的影响。The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.

系列为铝、锌、镁合金，商用最强力合金之一，普通抗腐蚀性能及机械性能。This is 7xxx series aluminum, one of the highest strength, commercially available alloys with fair corrosion resistance and machinability.