Please help us improve the quality of example sentences! Edit on Github

型坯成型是挤出吹塑中的一个重要阶段。Parison formation is a critical stage in extrusion blow molding.

型坯成型是塑料挤出吹塑中的一个重要阶段。Parison formation is a critical stage in plastics extrusion blow molding.

Other words in sentence

本文系统地分析了挤出吹塑型坯的膨胀。The parison swell in the extrusion blow molding was analyzed systematically.

我们的分析将著重在各演算法于系统的耗能效率。Our analysis focuses on their energy efficiency and performance com- parison.

介绍其涂料配方及制备，并与俄罗斯航空通用防腐底漆进行了比较。Com- parison is made with anti-corrosive primer for general aviation use in Russia.

型坯壁厚控制器是塑料中空成型机的关键部件之一。Parison wall thickness programmer is one of the key elements in blow moulding machines.

聚合物挤出吹塑中型坯的自由吹胀受到多方面因素的影响。The free inflation are parison in extrusion blow molding is governed by a number of factors.

Other words in sentence

重新推导出该间隔与型坯壁厚之间的计算公式。A calculating formula of the relationship between beam gap and parison wall thickness is presented.

介绍了型坯壁厚控制系统在中空吹塑机中的设计与实现。This paper introduces the design and implementation of parison wall thickness control system in blow molding machine.

采用人工神经网络方法预测了受模口温度和挤出流率影响的型坯成型阶段的膨胀。Neural network method was used to investigate the parison swell affected by the die temperature and extrusion flow rate.

POP色料的使用还能避免涉及熔体破坏或过多的型坯停留时间，并且有助于推叠承压强度。The use of POP colors also avoids issues involving melt fracture or excessive parison hang time and aids column crush strength.

结果表明，为了得到理想的制品外观和性能，需要对挤出螺杆、加工工艺参数、型坯设计和拉伸比进行改进。The results show that the optimal bottle performance requires modified screw, processing parameter, parison design and stretch ratio.

Other words in sentence

目的观察并比较成品金属螺纹桩和铸造金属桩在桩冠修复中的临床效果。Objective To study the effect of using screw mental post and cast post in post crown restoring respectively and bring into com parison.

结果表明，聚丙烯与较高熔体流动速率的聚乙烯共混后，其型坯直径膨胀的变化范围较宽，垂伸较明显。The results showed that the swelling range of parison diameter of PP blended with higher MFR PE is wider and its parison sag is more apparent.

在中空塑料容器的挤出吹塑成形工艺中，型坯壁厚控制技术是关系产品质量的关键技术之一。Automatic control technology for the parison wall-thickness of plastics blow-extrusion container is one of the key technology for the quality of the product.

以小波变换为工具提取故障后的行波信息，并通过小波变换实现行波幅值比较式方向保护。The principle of directional protective relaying based on wavelet transform for detection of fault information and amplitude com parison of travelling wave is presented.

结果表明为了得到理想的制品外观和性能，需要对挤出螺杆、加工工艺参数、型坯设计和拉伸比进行改进。The results showed to produce product with perfect appearance and property, modifications of screw, processing parameter, parison design and stretch ratio should be made.

Other words in sentence

采用型坯自动闭环控制技术、节能控制技术及自动生产技术对塑料挤出吹塑中空成型机进行改进。The technology of closed-loop parison automatic control, energy conservation and automatic production is used to improve the plastics extrusion hollow blow molding machine.

对传感器的工作原理进行了理论分析，通过与压电式加速度传感器进行的比较实验，得到了一致的实验测量结果。The operation principle of the sensor is analyzed, the experiment is performed and the measure results are identical with those of piezoelectric acceleration sensor in com parison.

文章介绍了硫化床锅炉粉煤灰在生产加气混凝土中所遇到的常见问题，并从根本上进行比较，利用科学的方法找到最佳配比。This article introduces the ordinary problems in using boiler fly ash for producing aerated concrete, and gives the optima albatch in the science method according to the com parison.