Please help us improve the quality of example sentences! Edit on Github

提出了斜角切削热力模型。A thermomechanical model for oblique cutting was proposed.

工程师使用ANSYS软件分析电脑和主板的热应力。Engineers use software from ANSYS to examine thermomechanical stresses in computer packages and boards.

Other words in sentence

本文对受拉伸载荷的铝合金板被强连续波CO_2激光照射时的热机械响应进行了报导。Thermomechanical response of Al plates under tension to high energy CW CO2 laser radiation is discussed.

对01420合金的形变热处理工艺和超塑性进行了研究。The thermomechanical processing and superplastic deformation behavior of 01420 alloy have been investigated.

直接淬火，名词，在形变热处理过程中，最终热变形之后立即进行淬火。Direct quenching, n—in thermomechanical processing, quenching immediately following the final hot deformation.

结果表明，锻造余热淬火工艺对汽车转向节质量有明显改善。The results show that the thermomechanical treatment can improve the quality of the automobile steering knuckle.

计算得到了材料的涂层处的应力状态以及它对复合材料整体热机械加载性能的影响。The stress in the coating is obtained as well as it's influence on the thermomechanical behavior of the material.

Other words in sentence

另外，还研究了下部填充料对倒装芯片封装热应力可靠性的影响。In addition, the impact of underfill properties on thermomechanical reliability of the FCOB assembly was addressed.

如何正确地选择和控制工艺方案及其参数，是影响铝合金形变热处理效果的一个关键因素。One of the key problems for thermomechanical treatment of aluminum alloy is how to determine the process parameters.

该技术还可以应用于处理一个设备周期性的热疲劳。The technology also can be applied to address thermomechanical fatigue that develops during a device's continual on-and-off cycle.

本文介绍了热机械过程控制的冶金原理，基本物理要素和过程参数。This paper presents the metallurgical principle of thermomechanical process control, basic physical elements and process parameters.

长水口是实现钢水无氧化浇注的重要元件，在使用过程中常常因为热机械应力过大而损坏。Shroud is an important component for non-oxidation casting of steel. Thermomechanical stress is a major cause that results in its damage.

Other words in sentence

木材也可以粉碎炼油厂，使用高压蒸汽和度，以建立所谓的热浆。The wood can also be crushed with refiners, which use high pressure steam and temperatures to created what is called thermomechanical pulp.

研究了汽车转向节锻后余热淬火工艺对钢的组织和性能的影响。The effect of thermomechanical treatment on the microstructure and properties of the automobile steering knuckle was researched in this paper.

通过非线性有限元分析，计算出焊点疲劳寿命对下部填充料基本热力学性质的依赖关系。Through non-linear finite analysis , the dependence of fatigue life of solder joint on thermomechanical properties of underfill was calculated.

并通过以上对PCB组件在再流焊过程中受到的热冲击进行比较深入的分析，提出了减小翘曲的方法。Moreover, through the intensively thermomechanical analysis of PCBA in the process of reflow soldering above, some methods are given to reduce the warpage.

对与温度效应有关的材料的热–力学特征的正确理解是分析该类工程问题的一个关键。Better understanding of the thermomechanical behaviour of the materials subjected to temperature effects is a key issue for the analysis of this kind of applications.

Other words in sentence

用多元统计分析中的主成分分析法优化设计木片热磨机械浆增强尼龙复合材料，合理地确定多项性能兼优的最佳纤维含量。The best fiber capacity of wood thermomechanical pulp reinforced nylon composite could be determined accurately by optimum design method of main composition analysis.

对不同结构双酚型苯并恶嗪树脂的热固化温度，固化物化学耐热性和热机械性能进行了综述。The thermohardening temperature, chemical heat-resistance and thermomechanical property of the curing material of different types of bisphenol benzoxazine were presented.

结果表明，控轧控冷后的试验钢含有铁素体、贝氏体、马氏体以及少量残余奥氏体的混合组织。The results showed that the mixed microstructure containing ferrite, bainite, martensite and a few retained austenite can be obtained by thermomechanical controlled processing.