Please help us improve the quality of example sentences! Edit on Github

你能给我买一个新的合叶吗？Could you buy a new hinge for me?

那里有一扇陈旧的门，门的合叶很难转动。There was an old door there, on crusty hinges.

Other words in sentence

所有门应该配置自动关闭合叶。All doors shall be equipped with self-closing hinge.

后门是在顶部接装的合叶，以便于向上开。The rear door is hinged at the top so that it opens upwards.

还有一只破旧的木柜，一只带毛的皮箱，上面的合叶都已经裂开了。There was a seedy old chest, and an old hair trunk with the hinges broke.

抗粗暴使用的钉入式梅花螺丝用于加固合叶、门挡、门插销和门栓，以及安装五金件。Vandal-resistant, Pin-in-Head Torx Screws attach hinges, door stops, door latch keepers and mounting hardware.

主要产品有各种中高档拉手、合叶、挂钩、螺丝及各种紧固件等。The main products are all kinds of high-end handle, or leaves, link, and all kinds of fasteners such as screws.

Other words in sentence

贯穿螺栓加固面板到隔断板框U形槽和负载弹簧，面板和隔间门采用全高度自动关闭合叶。Through-bolted panel-to-stile U channel and spring-loaded, self-closing hinge run full height of panels and doors.

门挡和合叶应该采用不锈钢钉入式梅花机制螺丝加固在螺纹黄铜嵌入件内。Door stops and hinges shall be secured with stainless steel, pin-in-head Torx machine screws into threaded brass inserts.

黑莓一种灌木悬钩子属，通常有带刺茎干，复合叶和小核果的。Any of various shrubs of the genus Rubus, having usually prickly stems, compound leaves, and an aggregate fruit of small drupelets.

合叶应该采用防盗钉入梅花不锈钢机制螺丝固定在门和隔断板框上的工厂预装螺纹黄铜嵌入件上。Hinges shall be attached to door and stile by theft-resistant, pin-in-head Torx stainless steel machine screws into factory-installed, threaded brass inserts.

连续钢琴合叶应该采用防盗钉入式梅花不锈钢机制螺丝加固在门和隔断板框上工厂预装的螺纹黄铜嵌入件上。Continuous piano-hinge shall be attached to door and stile by theft-resistant, pin-in-head Torx stainless steel machine screws into factory installed, threaded brass inserts.

Other words in sentence

她常常会有这种感觉，当合叶发出轻微的声响，正如她现在听到的那样，推开了法国式的窗，她将自己置身在伯尔顿的气息之中。For so it had always seemed to her, when, with a little squeak of the hinges, which she could hear now, she had burst open the French windows and plunged at Bourton into the open air.

苏州市合叶精密机械有限公司是一家集设计、生产、销售、服务为一体的机械加工型企业，主要为外资企业做配套服务。Suzhou Heyer Precision Co. , Ltd is a precision mechanical manufacturing enterprise combine with the design, manufacture, sales and service etc. Our main customers are foreign enterprises.

根据风力机叶片设计的实际过程，在三次参数样条曲线拟合叶片翼型曲线的基础上，提出了一种在计算机上能立体显示叶片截面及其结构的程序设计方法。On the basis of blade airfoil curve fitted with triple spline function and the practical process, a kind of program design method is offered to display the section of WECS blades and its structure.