Please help us improve the quality of example sentences! Edit on Github

子层在设计中空挤压。The sub-floor extrusion is hollow in design.

寻觅，吸吮和吞咽，喷出反射。Rooting, Sucking and Swallow, Extrusion Reflex.

Other words in sentence

铸造，板金，车削，铣切，挤制。Casting, Sheet metal, Turning, Milling, Extrusion.

为防备磨损拉伸冲头必须做镀层处理。Extrusion punches must be coated to prevent galling.

采用挤出成型工艺来制备自润滑复合材料轴套。And use the Extrusion process to produce axle sleeves.

药团通过挤压而成管状药。The dough was formed into tubular grains by extrusion.

该指示符号显示了切割挤出的方向。The indicator shows the direction of the cut extrusion.

Other words in sentence

一种即食型挤出蒸煮谷类制品。An extrusion cooked cereal product in ready-to-eat form.

挤压模，镶块，注塑模，芯轴。Extrusion tools, die inserts, injection mould, mandrels.

因此能够挤压出冷净成形制品。Extrusion of a cold net-formed article is thus possible due.

具有机械制图和挤出模具计划阅历。Experienced with mechanical drawing and extrusion die design.

采用热挤压法成型制备出卤化银多晶光纤。The silver halide fibers were made by means of hot extrusion.

Other words in sentence

挤出模是异型材挤出生产过程中的关键部件之一。Die is one of the critical parts in profile extrusion procedure.

型坯成型是挤出吹塑中的一个重要阶段。Parison formation is a critical stage in extrusion blow molding.

提出了虎克式万向节热挤压成型的可行性。The feasibility of the joint hot extrusion forming was put forth.

本级支持与厚壁产品的高挤出速率。This grade enables high extrusion rates with thick-walled product.

图1所示为一热冲压平面结合模具的公模简图。Figure 1 shows the male die of a hot extrusion planar combined die.

Other words in sentence

同时对共混体的挤出加工性能进行了研究。At the same time the Brabender extrusion behaviour was also studied.

此项研究结果可为扁挤压筒的光弹性分析提供帮助。The study is helpful to photoelastic analysis on oblate extrusion pipe.

并得到各挤压参数对残油率的影响的大小关系。The influence of extrusion parameters on residual oil rate was obtained.