Please help us improve the quality of example sentences! Edit on Github

检查扣板，以保证适当的调整。Check the gusset to insure proper alignment.

异形长条铝扣板天花。Smallpox of abnormity strip aluminous gusset plate.

Other words in sentence

焊接主要扣板如上所示在提请大会。Weld the main gusset as shown in the drawing above.

江芷兰一下子抓了李嫂的衣袖。The river Zhi orchid grasped Li Sao's gusset a while.

他们把名字写在衣袖上，并穿一个星期。They write the name on their gusset and keep it for a week.

焊缝交叉成员扣板如下图所示。Weld the cross-member gusset as shown in the drawings below.

下一步，检查和整顿的翘曲扣板根据需要的一面。Next, inspect the gusset for warpage and straighten as needed.

Other words in sentence

扣板相同的地点对面焊珠的。Place identical weld beads on the opposite side of the gusset.

已有三个结构在翼缘节点板端部出现了裂纹。Three structures have exhibited cracking at the ends of flange gusset plates.

铝扣板分为表面有冲孔和平面两种。Cent of aluminous gusset plate has punching and plane for the surface two kinds.

这个洞是放置所示16.3英寸主要扣板落后于前面的一角。This hole is placed 16.3 inches behind the front tip of the main gusset as shown.

对于90度交叉成员三轮车的设计，该折是延长1英寸的显示。For the 90 degree Cross-member Trike Design, the Gusset is extended by an inch as shown.

Other words in sentence

记住，主要扣板略有缩短，以满足跨成员扣板。Remember that the main gusset is slightly shortened to accommodate the cross-member gusset.

为此，本文详细介绍了整体节点钢桁梁的设计和其细部处理方法。This paper gives a description on design of steel truss with integral gusset and its details.

多种板宽条型扣板可同时安装在一根龙骨上，可形成宽窄变化。Wide variety of bar gusset plate can be installed on a keel on the changes in width can be formed.

最后还分析了节点板与销栓的弹塑性接触问题。Finally, contact method is used to analyze the elastoplastic contact behavior between gusset and pin.

这种扣板可以安装在龙骨上，还能起到遮掩管道的作用。This kind of gusset plate can be installed go up in keel, return the effect that can have cloak conduit.

Other words in sentence

唯一不同的开放源码软件配置的是，折后主要是缩短了1.5英寸。The only difference for OSS configuration is that the rear of the main gusset is shortened by 1.5 inches.

介绍了孙口黄河大桥整体节点的焊接特点。In this paper, the welding characteristics of monolithic gusset for Sunkou Yellow River Bridge were introduced.

一旦折弯曲和弓冲洗的支持，慷慨支持和焊接一珠两折弓上，如图所示。Once the gusset is bent and flush with the support bow, weld a generous bead on both gusset and support bow as shown.