Please help us improve the quality of example sentences! Edit on Github

内高压成形过程是很重复。The hydroforming process is very repeatable.

选择圆管中间膨胀的液压成形为研究对象。The hydroforming of bulging in the middle of a tube was studied.

Other words in sentence

在内高压的应用中，液压机用于闭合内高压成形模具。In hydroforming applications hydraulic presses are used for closing hydroforming dies.

确定合理的加载路径是管件液压成形工艺设计的关键。It is important to design the loading path correctly during the tube hydroforming process.

板充液成形已被证明是制造复杂零件一种有效的方法。Sheet hydroforming has proven to be an effective method for manufacturing complicated parts.

非对称Y型三通管内高压成形是该项技术中应用较为广泛的部分，同时也是一个难点。Unsymmetrical Y-shaped tube hydroforming is applied broadly and it is a difficult point as well.

管液压成形为具轻量化与一体化特徵的新兴成形技术。Tube hydroforming is a developing technology with advanced features of lightweight and single part.

Other words in sentence

圆管液压成形过程中的轴向密封力与内压力的关系及控制直接影响到圆管的成形状态。Relationship and control of axis sealing and internal pressure directly affects deformation process in tube hydroforming.

结果表明，轴向进给速度的选取对内高压成形三通管具有重要影响。The simulation result shows that the selection of axial feed velocity has a strong influence on hydroforming tri-branch tube.

内高压成形及热成型因特拉肯的内高压成形压机系统是在生产或工艺开发应用。Hydroforming & Warm FormingInterlaken's Hydroforming Press Systems are for use in production or process development applications.

随着对力和运动控制优势，因特拉肯的内高压成形媒体提供了更大的组成部分的整体素质。With superior control over forces and motions, Interlaken's Hydroforming Press provides a greater overall quality of formed parts.

利用非线性有限元理论方法，建立了后桥壳液压胀形有限元模型。By using non-linear finite element theory, a non-linear finite element model for hydroforming for rear axle housing is established.

Other words in sentence

在国外，液压成形通常有专用的液压成形设备，但其价格昂贵，超过国内很多厂家的购买力。Though special equipment for hydroforming has been produced, the price of it is very expensive which exceeds purchasing power of domestic factory.

目前金属板金件逐渐走向少量多样，应用板材液压成形技术的机会将越来越多。Today, the trend of metal sheets is towards small quantity and great variety. For the future, the opportunity of sheet hydroforming will be increasing.

通过对热影响区进行分片的方式，建立了包含焊缝和热影响区的焊缝管液压胀形的有限元模拟模型。Finite element model including the weld and the HAZs of the welded tube in hydroforming is made by slicing the HAZ into strips with various flow stresses.

模拟结果与物理实验结果相吻合，证明FLSD可作为管材内高压成形等复杂应变路径下成形极限的判据。The simulation result compares well with the experimental result The FLSD is able to predict the forming limit of tube hydroforming with remarkable accuracy.

通过力学分析和全量本构方程，推导出了变径管内高压成形送料区壁厚增厚的解析公式。The analytic formula of the feeding zone thickness distribution in hydroforming of variational cross-section tube is derived by using the total strain theory.

Other words in sentence

本文将针对管件液压成形的原理、优点、应用范围、国内外技术发展及产品应用的现况与发展动向进行探讨。This paper presents the principle of tube hydroforming , advantages, application fields, and the current status of industrial applications and R&D activities.

管壳零件轴压液力成形以管材为初始坯料，可制造各种复杂的空心零件，具有广阔的应用前景。Using a length of tube as the blank, hydroforming technology of tubular parts promise an extensive prospect to produce a variety of complex hollow components.

文章作者就内高压成形的模具设计以及功能集成给出了解决方案，并进一步讨论了内高压成形工艺的利润率。This paper presents solutions for tool design and functional integration for hydroforming tubes. Furthermore the profitability of IHP processes is demonstrated.