Please help us improve the quality of example sentences! Edit on Github

两部分的氩弧焊焊接在一起。The two parts are TIG welded together.

在氩弧焊焊接机建造多次使用。The TIG welder used for much of the construction.

Other words in sentence

我们提供胶合剂定子铁芯或TIG焊接的钉子铁芯。We offer glue bonding or TIG welded stator cores.

TIG焊时的一次引弧成功率高。And in TIG welding, the rate of are successful increased.

结果表明，用该方法对TIG焊过程建模是有效的。The result shows that the method is available to model the TIG welding dynamic process.

研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.

研制了一种用于TIG堆焊的时效硬化工具合金金属粉芯焊丝。A new type of age hardening alloy metal powder-cored wire for TIG surfacing is developed.

Other words in sentence

应用TIG焊接钛合金时，气体保护问题常常是决定焊接质量的关键。In TIG welding of titanium alloys, the welding quality usually depends on the gas shielding.

叙述了该机的结构特点、电气原理及性能，并就该机与TIG焊机、送丝机的程序控制作了简介。The program controls of the bench with TIG welding machine and wire feeder are briefly introduced.

目前铝制空分设备的纵焊缝大都是采用双人双面TIG立焊。Nowadays the method of double-side TIG erect welding is adopted in the air-separate equipments largely.

介绍了钨极自动氩弧焊在不锈钢复合管生产线上的应用。The application of automatic TIG welding on stainless steel compound pipes production line is introduced.

研制了一种用双绕组储能电抗器构成的晶闸管TIG焊电源。TIG welding power source made from SCR and bifilar winding energy saving inductor is introduced in this paper.

Other words in sentence

根据钨极氩弧焊的特点，为更好发挥其功效，对WSE-500焊机进行了认真研究与分析。Based on the characters of TIG welding, the WSE-500 TIG welding has been studied and analyzed better for its efficiency.

依据自动控制理论中的小信号理论，小电流TIG焊的电弧具有线性系统的特征。According to small signal theory of automation theory, arc of low current TIG welding can be considered as a linear system.

建立了熔透情况下三维运动TIG焊接熔池中流体动力学状态及传热过程的数值分析模型。A model is established to analyze three-dimensional fluid dynamics and heat transfer in TIG weld pools with full-penetration.

介绍以弧压为传感信号的摆动式TIG焊焊缝跟踪技术。This paper introduces the seam tracking technology in arc-swing type TIG welding, which takes the arc voltage as sensor signal.

采用等效比热法来确定液相分数，假定固液相等同区来解决工件熔化区与非熔化区的移动边界。Fluid flow and heat transfer of TIG welding arc and pool were analyzed based on built model with finite element analysis method.

Other words in sentence

介绍了一种由RLC串联谐振电路构成的交流TIG焊机引弧稳弧器，试验表明可以解决小电流条件下的引弧和稳弧，效果良好。The striking and stabilizing arc machine consisting of a RLC series resonant circuit of the AC TIG welding machine is introduced.

在小电流薄板脉冲TIG焊接全熔透的试验条件下进行了试验，并获得了所需数据。Experiments were conducted under the conditions of TIG welding with small current and thin plates. The desired dada was extracted.

利用C20系列可编程序控制器对微电机加工制作中的定子铁心、电机壳体TIG自动焊接实现过程程序控制。Programmable controller C20 is used in the program control of TIG automatic welding on manufacturing micro motor shell and stator core.