Please help us improve the quality of example sentences! Edit on Github

包括泥料、泥浆以及粉状坯料等。Including mud, mud and powder billets and so on.

采用方形坯料深拉延圆筒形件是一项新技术。With square blank to draw cylinder is a newly technology.

Other words in sentence

两种增塑剂对坯料其它性能的影响基本相同。Effect on other performance is the same for both plasticizers.

这些坯料由巴布洛达尔钢铁厂供应。The blanks for the plant are supplied by Pavlodar steel works.

确定坯料外形是拉深件工艺设计中的一项重要工作。Determination of blank shape is an important task in deep drawing process.

这个厂所用的坯料由临近的巴普洛达尔钢铁厂提供。The blanks for the plant are supplied by the neighbor – Pavlodar steel works.

首先采用低过热法制备半固态成形的原始坯料,制定了合理的坯料制备工艺。In the first step, billets were made with the method of low super heat casting.

Other words in sentence

坯料到位后,送给信号则自动从电路中断开。When the blank is on the set,the feeding signal will be switched out automatically.

对于这种性质的模压淬火产品,典型使用825-900?的坯料温度。For press quench products of this nature, billet temperatures of 825 to 900. degree.

可清洗脱模剂和油污,几乎所有的塑料坯料不会受其侵蚀。E. O Cleaner washes off mold release agents oil stains without affecting most plastic bases.

然后进入脱管机,在那里3米长的管状坯料被加工成28米长的管子。Then there goes extracting mill that turns 3-meter long tubular billets into 28-meter pipes.

然后进进脱管机,在那里3米长的管状坯料被加工成28米长的管子。Then there goes extracting mill that turns 3-meter long tubular billets into 28-meter pipes.

Other words in sentence

采用均匀设计法,选择出了预成形最佳压边力与坯料尺寸的组合。The best combination of blank-hold force and blank size is obtained by uniform design method.

图1示出了坯料再加热时间和温度对极限拉伸强度的影响。FIG. 1 shows the influence of billet reheat time and temperature on ultimate tensile strength.

可清洗脱模剂和油污,几乎所有的塑料坯料不会受其侵蚀。E. O Cleaner washes off mold release agents and oil stains without affecting most plastic bases.

哈兹列特铝板带连铸连轧工艺已被成功地用于铝和铝合金冲击挤压用坯料的生产。Hazelett strip casting process is already successfully used for producing slug for impact extrusion.

通过生产实践中的工艺探索与经验总结,提出了铸轧法生产8014空调箔坯料的生产方法。Production method of 8014 Al foil stocks for air-conditioner by cast-rolling method was put forward.

Other words in sentence

成品坯料的涵盖您可以编辑您的口味,加入对他们的文字和不同的效果。The finished billets of covers you can edit on your taste, adding on them text and different effects.

我们要采购热轧轮酒吧,板,床单,线材,弹簧圈,带,坯料,金属废料。We want to buy Hot Rolled Round Bars, Plates, Sheets, Wire Rods, Coils, Strips, Billets , Metal Scraps.

坯料计算是板材三维曲面零件成形工艺设计的重要问题之一。Blank design is one of the important problems in the forming processes of three-dimensional sheet metal.