Please help us improve the quality of example sentences! Edit on Github

采用薄而均一的制件厚度。Use a thin and uniform part thickness.

铝合金制件,热镀锌钢制件。Material aluminium alloy , All parts are hot-dip galvanized steel.

Other words in sentence

双壁制件的吹塑主要以HDPE、PP、工程塑料及各种共混料为原料。HDPE, PP, engineering plastics and various. blends are used as resins.

除闭口销为不锈钢件,其余为热镀锌钢制件。The closed-pin is stainless steelwork, the parts are galvanized steel.

外管为铝制件,内管为热镀锌钢制件。The outer sleeve is aluminum , inner sleeve is hot-dip galvanized seel.

使成型的制件性能满足了产品性能要求。The properties of the molded product could meet the need of application.

铝制件电镀质量的好坏,预处理是关键。Whet her electroplating quality is good or bad depends on pre-treatment.

Other words in sentence

提高快速成型制件质量是快速成型技术研究的热点。Improving part quality during rapid prototyping is the important problem.

本体为铝合金件,其余为热镀锌钢制件。The body is aluminium alloy, the other parts aare hot-dip galvanized steel.

冲压方向对冲模结构及制件质量有重要影响。The die structure and panel quality are effected by the stamping direction.

外管为铝制件、内管为热镀锌钢制件。The outer sleeve is aluminium, the inner sleeve is hot-dip galvanized seel.

闭口销为不锈钢铸件,其余为热镀锌钢制件。The cotter pin are stainless steel, the other parts hot-dip galvanized steel.

Other words in sentence

钢制件,热镀锌。如需防盗,可另购防盗装置。Hot-dip galvanized steel. Thief-proof equipment can be supplied if it is needed.

底压和线夹为铝合金制件,其余为热镀锌钢制件。The body and keepers are aluminium, the other parts are hot-hip galvanize steel.

线夹为铝合金件,锤头为锌合金铸件,标准件为不锈钢制件。Aluminum alloy wire clamp, kirksite casting hammerhead, stainless steel norm part.

上盖板为铝合金件,其余为热镀锌钢制件。Theu upper cover is aluminium alloy, the other parts are hot-dip galvanized steel.

锤头为灰铸铁件,涂漆,其余为热镀锌钢制件。Counter weights are greyiren. painted The other parts are hot-dip galvanized steel.

Other words in sentence

线夹本体和抽匣为铝制件,其余为热镀锌钢制件。Clamp body and kdeeper anr aluminium , the other parts are hot-dip galvanized steel.

线夹本体和抽匣为铝制件,其余为热镀锌钢制件。Clamp body and kdeeper are aluminium , the other parts are hot-dip galvanized steel.

利用最优化理论并结合CAE技术对塑料制件结构进行优化。Sturcture of a complex plastic article was optimized by optimization theory and CAE.