Please help us improve the quality of example sentences! Edit on Github

每一活塞组的重量配平公差不超过0.5克。Each piston set is matched to within 0.5 gram.

在每个关键控制点设立公差。Establish tolerances at each critical control point.

Other words in sentence

公差测试证书，测试流程图中。Tolerance test certificate, test flow chart incuded.

比传统方法高公差找平。Screeds to higher tolerances than conventional methods.

这些选项控制几何公差信息！These options control geometric tolerancing information!

封头，筒节，锥体及平盖等凸起公差要求。Convex tolerance for head, conical part and plate cover etc.

所有的尺寸和公差都适用于单品状态下。All dimensions and tolerances apply in a free state condition.

Other words in sentence

必须具备确定设备及部件的几何尺寸和公差的能力。Experience with geometric dimensioning and tolerancing is a must.

相关要求是一种边界控制的公差设计方法。Relative requirement is a tolerancing method of boundary control.

其他如P6或P5公差等级，可根据要求提供。Other tolerance classes, such as P6 or P5 are available upon request.

我们考虑非线性约束的公差分配问题。We consider the nonlinearly constrained tolerance allocation problems.

表面光滑，机械性能均衡，紧密度公差。Smooth Surface, Mechanical Properties equilibrium, Tightness Tolerance.

Other words in sentence

使公差再小一些是可能的，但这会降低成品率，使成本增加。Tighter tolerances are possible , but with lower yield and greater cost.

所有方面的钟形曲线，这些在恰当的公差。All aspects have bell curves, and these are within the proper tolerances.

梦想大心宽，学会海洋，河流的公差是修养。Dream big heart wide, learn to sea, rivers tolerance is self-cultivation.

几何公差在2检查连接部分乘以为国际米兰。Tolerance in Geometry check for inter-segment connections multiplied by 2.

这个目录包含滚动轴承制造公差的的列表。The catalogues of the rolling bearing manufacturers contain tolerance tables.

Other words in sentence

工件机壁孔之公差必须为H7，保证内外环较高同轴度。The rabbet for install the outer must be H7 tolerance, ensure a high axiality.

焊接规范或认可的WPS中规定的公差应予以适用。Tolerances specified in the welding specification or approved WPS shall apply.

保持架材料为酚醛层压布管，公差等级有5、4和2级。Cage material is phenolic cloth laminated tube, tolerance levels are 5,4 and 2.