Please help us improve the quality of example sentences! Edit on Github

工人摄于炭黑厂约翰瓦谢。Photo by Worker at carbon black plant John Vachon.

炭黑吸收阳光辐射,让大气增温。Black carbon absorbs solar radiation, warming the atmosphere.

Other words in sentence

分析了炭黑在气力输送过程中的破碎机理。The fragmentation mechanism of the carbon black was analysed.

结果表明,白炭黑是硅橡胶包覆层材料较为理想的补强填料。The results show that SiO 2 is an effective reinforce filler.

普那路亚海滩有名的深色炭黑沙滩。Punaluu Beach is the famous for its dark, charcoal black sand.

而炭黑的存续期就要短不少,在空气中飘浮几个星期之后就会落到地面。It remains just a few weeks in the air before it falls to earth.

在胎面胶中使用白炭黑和低滚动阻力炭黑。Use the carbon black with low rolling resistance and the silica.

Other words in sentence

把炭黑与PTFE乳液混和制成多孔电极。The porous electrodes were made by admixing PTFE emulsion with carbon black.

X白炭黑填充于透明及半透明鞋底,提高鞋底的强度、磨性能。BT-X silica white is filled into transparent or semi-transparent shoe-bottom.

炭黑是一种“短命”颗粒,在全球范围内处于一种永恒运动状态。Black carbon, a short-lived particle, is in perpetual motion across the globe.

XRD分析可知复合粒子中含有钛酸钡晶体和炭黑。XRD indicates that CB and barium titanate were existed in the compound particle.

测定了酯化白炭黑的物理化学性质、差热分析和红外光谱。The physicochemical properties, DTA and IR for esterified samples were determined.

Other words in sentence

研究了一种生产氟化铵和白炭黑的新工艺。A new manufacturing technology of ammonium fluoride white carbon black was studied.

白炭黑的加入有利于胶粘剂耐焊时间的提高。Putting in the silica is in favor of the improvments of soldering time of adhesives.

介绍了以煤系高岭土为原料制备白炭黑的新方法。A novel preparation method for amorphous silica from coal-based kaolin was developed.

当同时添加气相法白炭黑和ZDMA时,会观察到明显的协同补强效应。The obviously synergistic reinforcement of fumed silica and ZDMA to SBR was observed.

研究了炭黑填充丁基橡胶硫黄硫化体系的硫化特性。The vulcanizing properties of CB filled IIR with sulfur curing system were researched.

Other words in sentence

经比较发现采用湿法工艺对白炭黑进行表面处理时,捏合机是较适合的设备。The kneading machine is the most suitable equipment for fumed silica surface treatment.

以中等模量树脂适合于注塑成型的气囊门。硬度53D,并载有细颗粒大小炭黑。It has a nominal durometer hardness of 53D and contains fine particle size carbon black.

以中等模量聚酯合金适合注塑成型的气囊门。硬度55D和载有粒径炭黑。It has a nominal durometer hardness of 55D and contains fine particle size carbon black.